Nashville, TN, USA Oct. 30-Nov. 1, 2006
Paratherm Corporation in Booth #47.
Biofuels Workshop & Trade Show – Eastern Region is the second regional conference to focus on near-term development of commercial-scale ethanol and biodiesel production and use. In 2004, Biofuels Workshop & Trade Show – Western & Pacific Region in Sacramento, California, presented important technical and political issues that support biofuels production and use in the Western United States and Canada, and the Pacific Rim.
Paratherm Corporation Exhibiting in Booth #6879.
Sludge Drying, Thermal Systems, Hot Oil Temperature Control in Waste Water Operations
Today, WEFTEC – WEF’s Annual Technical Exhibition and Conference – offers the best water quality education and training available and is a leading source for water quality developments, research, regulations, solutions, and cutting-edge technologies.
This year, the WEFTEC Exhibition takes place October 22-25, 2006 in the Dallas Convention Center,
Paratherm Corporation in Booth #324.
Paratherm Corporation will be exhibiting its low temperature Paratherm CR™ heat transfer fluid at Informex 2006. As shown in the radar chart below, at -90C Paratherm CR has higher Total Jacket Cooling Duty and Jacket Side heat transfer coefficients than any other commercially available low temperature fluid.
Paratherm Technology Showcase: Effects of Water Contamination on Low Temperature Heat Transfer Fluid Performance. Tuesday, February 14, 9:20 am. Room 310 C.
Paratherm Exhibitor Showcase: On-Target Temperature Control—Paratherm Services and Heat Transfer Fluids, -100°C to 343°C.
Paratherm Corporation Exhibiting in Booth #1957.
May 9-11, 2006 — Rosemont, IL USA
Precise, uniform temperature control in powder/bulk process mixers, blenders, ovens, vacuum-, screw- and spray-dryers, extruders and wastewater solids drying to 650ºF film temperatures. Durable, environmentally-safe fluids have passed rigorous Bioassay and are safely and easily disposed (recycled) locally. Medium, Low, and and Ultra-cold temperature heat transfer fluids for temperature control in reactions and freeze-drying applications down to -100°C. Paratherm technical support focuses on preventive maintenance of the entire temperature-control system.
Paratherm Corporation Exhibiting in Booth #6022.
June 19-23 2006 McCormick Place, Chicago, IL USA
The Paratherm SludgeBuster team are system guys. We know about hot-oil temperature control units, and the hot oils that go into them. Want to hear how seal pots prevent hot-oil oxidation? About reversible pump units that make tool changing easier? The pros and cons of negative pressure hot oil units? Component differences in water/glycol units vs. oil units? These discussions, and more, will be ready on the tips of our tongues, at the show.
No matter what you’re looking for, you’ll find what you need at NPE 2006. Discover the machinery & equipment, new materials, ideas, and engineering breakthroughs that will add value to your products and increase your competitive standing.
Paratherm Corporation Exhibiting in Booth #324.
At the 2005 expo, 834 exhibitors filled more than 16 acres of display area in the Georgia World Congress Center with every conceivable product and service used by these industry groups. Approximately 18,763 leaders in the U.S. and international poultry industries attended, a 3.4 percent increase over the previous year.
THERMAL FLUID SAFETY AND MAINTENANCE is the subject of Paratherm’s IPE InfoMart Theatre presentation, as part of the Further Processing Session.
Paratherm Corporation Exhibiting in Booth #2274.
Co-located with Plastec West and Electronics West
Application-based tech support, fluid analysis, and preventive maintenance. Paratherm Corporation manufactures Heat Transfer Fluids (Hot Oils and Thermal Fluids) that provide precise, uniform process temperature control in non-pressurized closed-loop thermal systems for molding, extrusion, and laminating, as well as Sludgebuster™ products for cleaning hot-oil temperature control units.
Subscribe to our Newsletter!!!
Learn more about Paratherm with our email series covering useful resources, products, services, articles, and expertise. Just put your email address in the box and click Go.
Looking for a 650ºF Synthetic/Aromatic Heat Transfer Fluid? Click on the Paratherm HR beaker…
Paratherm HR Heat Transfer Fluid
July 24, 2012
Paratherm Corporation’s new website at Paratherm.com provides deep and detailed information on heat transfer fluids, and their safety, operation, and system maintenance, without requiring registration.
February 15, 2012
Heat transfer fluid properties vs. temperature on the web. In an online form, choose among available Paratherm Heat Transfer fluids, pick Fahrenheit or Centigrade and a degree increment, and the Paracalc™ software will instantly generate a spreadsheet