Paratherm
CR™
- Ultra low Temperature Condenser Operation for Lyophilizers
- No residue in Environmental Test Chambers
- Lower viscosity than Low temperature silicones
Unique low viscosity formula results in 10ºC lower operating temperature in existing temperature control units.
Higher heat transfer rates down to -100ºC than silicone based fluids. Impervious to coil freeze ups due to water contamination.
|
|
Paratherm
LR™
- Non-aqueous and non-aromatic replacement for water/glycol
- Flashpoint >60ºC
- Rated HT-1 for Food-Grade
No cleaning or flushing required when replacing silicone. LR fluid performance not affected by 5% silicone oil by volume.
The LR fluid can be used in condensers and heat exchangers where water contamination can pose significant safety or product quality issues or freezing problems.
Unlike silicone oils, LR vapors do not condense into silicone films on product and equipment surfaces. Spilled fluid is easy to clean up.
|
|
Paratherm
MR®
- Food Grade
- Single fluid for heating and Cooling (30ºF to 500ºF)
- Use in standard hot oil units when 30ºF operating temperature is required
- The MG fluid offers all the easy of use and safety advantages of food grade fluids with low temperature capabilities (to 30ºF)
|
