Non-aqueous specialty liquid phase heat transfer fluids used in industrial processing applications from -100ºC to +343ºC, including mineral oils, synthetic and organic-based formulas. Synthetic organic-based fluids will reach the highest temperature ranges on the thermometric chart below, without boiling or reaching the vapor phase. Extreme low-temperature products will remain liquid at the lower (left) end of the below scale.
Low Temperature Liquid
Heating & Cooling Fluids High Temperature Fluids
Paratherm
CR®
Higher Flowrates
Lowers Equipment Operating Temperatures by 10ºC
Paratherm
MR® Heat Transfer Fluid
Non-Aromatic
Run Lower Temperatures In Standard Hot Oil Units
No Noxious Odors
Paratherm
MG™
Food-Grade (NSF HT-1) Single-Fluid Heating and Cooling
Paratherm
LR™Heat Transfer Fluid
Water Sensitive Products
Non-Corroding Water/Glycol Replacement
Higher Flash Point--Rated Combustible, Not Flammable
Paratherm
HR™
NEW!
Heat Transfer Fluid
Synthetic/Aromatic
Gas processing
Chemical processes
Waste-oil recovery
Biodiesel production
Plastic processing
Paratherm
HE® Heat Transfer Fluid
High Flash and Fire Points
Economical
Durable in Vented Systems
Paratherm
NF® Heat Transfer Fluid
Batch Processing
Electric Immersion Heaters
Food Grade
Paratherm
OR® Heat Transfer Fluid
Sludge/Varnish Resistant
Non-Fouling, Non-Toxic
Extended Life In Mold Temperature Control Units
Low-Temp Start-up
Synthetic/Aromatic
Gas processing
Liquid terminal tank heating
Asphalt plants
Plastic Production
Click on the fluid name for heat transfer fluid properties,
case histories, applications, safety information, and complete descriptions.
Subscribe here to Paratherm's Short, Monthly Technical TipSheet, Free for Thermal Fluid Users...
Heat Transfer Fluids (Hot Oils, Thermal Fluids), Fluid Analysis, Application
Support and System Troubleshooting . Parathermify Your SystemSM
