| Chemical Name |
Hydrotreated Mineral Oil |
| Appearance |
Water White Liquid |
| Odor |
Odorless |
| Maximum recommended film temperature |
650°F (343°C) |
| Maximimum rec’d operating temp – fired heaters |
600°F (316°C) |
| Maximimum rec’d operating temp – all others |
630°F (332°C) |
| Minimum operating temperature 20 cPs (20 mPa-s) |
97°F (36°C) |
| Minimum start-up temp 300 cPs (300 mPa-s) |
24°F (-4°C) |
| Viscosity @ 60°F/15.5°C sSt (mm2/sec) |
73 |
| Density at 60°F/15.5°C lb/gal (kg/m3 ) |
7.4 (887) |
| Flash Point Pensky-Martens Closed Cup (D93) |
> 300°F/149°C |
| Boiling Point (14.7 psia/101 kPa) |
>700°F/371°C |
| Vapor Pressure @ max operating temp psia (kPa) |
2.5 (17) |
| %Volume expansion over recommended operating temperature per 100°F (°C) |
5.5 (9.9) |
| Average Molecular Weight |
340 |
| Dielectric Breakdown Voltage D1816-04 (kV, 0.1″ gap) |
34.37 |
| Dielectric Constant (1KHz) D924-04 |
2.183 |
| Dissipation Factor (1KHz) D924-04 |
0.000003 |
| Volume Resistivity at 100V (?-cm) D257-07 |
3.4 X 1014 |
| Heat of Combustion (approximate) BTU/lb (kJ/kg) |
20,000 (46,300) |
| Heat of Vaporization (approximate) BTU/lb (kJ/kg) |
91 (210) |
