| Typical Properties* |
|
Physical
Properties |
| Feedstock |
Hydrotreated Natural hydrocarbon |
| Color |
Transparent, Water-White |
| Taste & Odor |
None |
| Optimum Use Range |
175°F to 550°F
(79°C
to 288°C) |
| Maximum Recommended Film
Temperature |
600°F (316°C) |
| Flash Point (coc) ASTM D-92 |
350°F (177°C) |
| Fire Point (coc) ASTM D-92 |
395°F (202°C) |
| Atmospheric Boiling Point, 10% Fraction, ASTM D-1160 |
631°F (333°C) |
| Vapor Pressure, psia @ 500°F
(260°C) |
0.948 |
| Pour Point ASTM D-97 |
-35°F (-37°C) |
| Specific Gravity, 60/60 ASTM D-1298 |
0.8863 |
| Thermal Expansion** |
0.0004/°F
0.0007/°C |
Density @75°F (24°C)
ASTM D-4052 |
7.23 lb/gal |
| Viscosity @ 40°C ASTM D-445 |
40.12 cSt |
| Average Molecular Weight ASTM D-2502 |
360 |
Total Acid Number (TAN)
ASTM D974 |
0.01 |
| Heat of Vaporization, Calculated |
93 BTU/lb |
| Electrical Properties |
| Dielectric Strength kV/cm (disk) ASTM D-877 |
>35 |
| Dissipation Factor @ 25°C, 60 Hz ASTM D-924 |
0.0002 |
|
| *These
are typical laboratory values, are not guaranteed for all samples. **Note: Normal practice is to size the
expansion tanks so that they are 1/4 to 1/3 full when the system is cold, and 2/3
to 3/4 full when the system is at the maximum normal operating temperature.
Download/View Engineering Bulletin as a PDF
File  |
