| Typical
Properties* |
| Physical Properties |
| Feedstock |
Paraffinic Hydrocarbon (Single Cut) |
| Appearance |
Transparent, Pale Yellow |
| Odor |
Faint (oily) |
| Optimum Use Range |
150°F to 600°F (66°C to 316°C) |
| Flash Point (coc) ASTM D-92 |
440°F (227°C) |
| Fire Point (coc) ASTM D-92 |
500°F (260°C) |
| Atmospheric Boiling Point, 10% Fraction,
ASTM D-1160 |
779°F (415°C) |
| Vapor Pressure, psia @ |
 300°F |
0.00039 |
| 350°F |
0.00193 |
| 400°F |
0.0097 |
| 450°F |
0.0387 |
| 500°F |
0.1350 |
| 550°F |
0.3870 |
| 600°F |
0.8700 |
| Coefficient of Thermal Expansion** |
0.000592/ °F
0.001066/ °C |
| Heat Of Vaporization (Calculated) |
77.19 BTU/lb |
| Heat Of Combustion |
19,550 BTU/lb |
| API Gravity ASTM D-287 |
31.7 |
| Specific Gravity @ 15°C ASTM D-1298 |
0.8651 |
| Density, lb/gal @ 60°F (16°C) |
7.22 |
| Viscosity: cSt @ 40°C ASTM D-445 |
40.25 |
| Pour Point (Crystal Point) ASTM D-97 |
5°F (-15°C) |
| Pumpability: Centrifugal @ 2,000 centipoise,
nominal |
20°F (-7°C) |
| Color ASTM D-1500 |
1.0 |
| Molecular Weight ASTM D-2502 |
445g/mole |
| Corrosivity (3hr Cu Strip @ 100°C) ASTM D-130 |
1A |
| Total Sulfur (Mass%)
J-140 |
0.002 |
| Total Acid Number (T.A.N.) ASTM D-664 |
0.01 |
| Electrical Properties |
| Dielectric Strength @ 20°C, nominal |
>30 KV/cm |
| Optical
Properties |
| Refractive Index ASTM D-1747 |
1.4722 |
*These are typical laboratory values, and are
not guaranteed for all samples.
**Note: Normal practice is to size the expansion tank so that
it is 1/4 to 1/3 full when the system is cold, and 2/3 to 3/4
full
when the system is at the maximum normal operating temperature.
