| Chemical Name |
Synthetic Hydrocarbon Blend |
| Appearance |
Water White Liquid |
| Odor |
Sweet Odor |
| Maximum recommended film
temperature |
550°F (288°C) |
| Maximimum rec'd operating temp - fired heaters |
Not Recommended |
| Maximimum rec'd operating temp - all others |
425°F (218°C) |
| Minimum operating temperature 20 cPs (20 mPa-s) |
-140°F (-96°C) |
| Minimum start-up temp 300 cPs (300 mPa-s) |
-185°F (-121°C) |
| Viscosity @ 60°F/15.5°C sSt (mm2/sec) |
1.1 |
| Density @ 60°F/15.5°C lb/gal (kg/m3 ) |
6.94 (831) |
| Flash Point closed cup ASTM D-56 |
>103°F (40°C) |
Autoignition Temperature (max 10 sec ignition delay)
|
>430°F (221°C) |
| Vapor Pressure @ max operating temp psia (kPa) |
18 (124) |
| Average volume expansion, %/100°F (100°C) |
8.7 (15.7) |
| Average Molecular Weight |
130 |
| Dielectric Breakdown Voltage D1816-04 (kV, 0.1" gap) |
36.11 |
Dielectric Constant (1KHz) D924-04
|
2.59 |
| Dissipation Factor (1KHz) D924-04 |
0.00145 |
| Volume Resistivity at 100V (Ω-cm) D257-07 |
8.3 X 1011 |
| Heat of Combustion (approximate) BTU/lb (kJ/kg) |
17,000 (39,400) |
| Heat of Vaporization (approximate) BTU/lb (kJ/kg) |
148 (343) |
| Pour Point D97 |
<-193°F/-125°C |
*
These are typical laboratory values, and are not guaranteed for
all samples.
