|
Paratherm
SC®
System Cleaner Liquid
- Disintegrates Carbon Lumps
- Works Cold or Warm
- Compatible With Any Mineral Oil
- Can Clean Small System Overnight
Drain system while warm, add Paratherm SC system cleaner, run system cold for 3-4 hours, let system soak overnight, run warm (maximum 150 F) for 1-4 hours. Turn off heat, continue to run pump until liquid has cooled. Drain cleaner liquid and sludge, flush system one time, and recharge.
...more
|
 |
Paratherm
LC™ System Cleaner Liquid
- Restores System Performance
- Dissolves Sludge as System Runs
- Minimal Downtime
- Compatible With Any Mineral-Oil-Based Fluid
Add Paratherm LC system cleaner to your system as up to 10% of volume. Run the system normally for 2 weeks or longer. Drain and recharge your cleaned system.
...more |
| Get an instant email of the product information/instructions, safety data, and case histories for both cleaners by entering your email address here:
|
|
Not ready to change the oil? Or, you’d rather check its condition first? Try a Paratherm fluid analysis. It tells us much more than just the condition of your thermal oil.
Paratherm engineers use fluid analysis like a medical lab test, to get a solid peek into the operational health of the heart and circulatory system of your process temperature control.
Paratherm Technical Services will analyze any brand of hot oil.
Tough choice? Want More Info?
Call 800-222-3611(610-941-4900) or email info@paratherm.com |
